Many people use an HPA tank in their day-to-day life in different applications. An HPA tank is similar to a high-pressure tank in which air is present in a fully compressed form for using it in several things.
When you buy an HPA tank, refilling becomes an important concern to consider whenever required. So the need to refill your HPA tank will push you to visit some shops where refilling services are available. You probably would not prefer going to shop for a refill again and again.
But, if you do prefer, then you can easily get an air compressor to fill your HPA tank at a quite reasonable price in the market. So, basically, it depends on you whether you want to buy an air compressor and get the job done at your own place or you want to visit the market for a refill. Another option is to acquire it on rent for some time from someone else.
Whether you want to buy an air compressor to fill your HPA tank or you already have it, you have come to the right place to learn how to fill the HPA tank with compressor air. This article will help you understand and learn the process of filling an HPA tank with compressed air.
Tools required to fill HPA tank with air compressor
You need to look for a hose that is ideal for this task and make sure it has a gauge on it to monitor the PSI of the pressure going directly into the HPA tank. It should have a female thread that could easily attach to the nozzle on your air compressors outlet.
In case there is only a female connection on both your air compressor hose and HPA tank. You might need to purchase a male-to-male plug in order to connect them together. But if you have a male-to-female connection already then there is no need to buy a male-to-male plug.
Never hesitate to spend money on safety equipment as it will ensure your safety. In order to fill the HPA tank with an air compressor, you need to have safety glasses and pair of safety gloves. You will be enlightened with some safety tips further down this article.
Learn how to fill HPA tank with air compressor
Inspect the HPA tank and release air
After you acquire all the required tools, now you need to make sure that you check the HPA tank carefully. In case of any sort of leakage, you would not be able to complete the filling. If a leakage tank leaks air during the filling process and there is no doubt that it can cause a serious accident. Call an expert to repair it, or try to solve it by using some tools if you are certain about the leakage.
The next important thing you must never forget is releasing air from the Tank. It is necessary to make sure that the HPA tank does not have air while you are refilling it. Release the air in one go, if there was previously had some. In order to do that take it to a well-ventilated area and just open the air release valve. It will take a few seconds to remove all existing air. Never hesitate to Choose a well-ventilated area as the existing air can cause breathing problems.
Attach the hose and start the air compressor
The next step after checking the leakage and releasing the air to fill the HPA tank using an air compressor. In order to do that you connect both the nozzles in the tank and the air compressor. it is important for both the nozzles to be compatible to make sure there are no air leaks.
Open the smaller kit from the tank and the air compressor so that you can attach the air hose. Check that the air hose fits perfectly into the fitting of the tank.
Now just simply switch on the air compressor and keep the air compressor at a full charge if it is battery-powered. Now it’s time to connect the air compressor to the power source. Whether it is a cordless or corded air compressor, just connect the cable properly to prevent any issues.
Now, press the power button to turn it on and start filling the tank using an air compressor. In order to ensure proper filling of air, it is recommended to maintain the right PSI for air. It is important for the needed pressure to match the maximum PSI for the HPA tank.
Check the PSI
Never forget to keep an eye on the PSI during the air filling process as it is vital for filling sufficient air in the HPA tank. By doing this, you will be able to know whether the tank is full of air or still needs to be filled more. You just need to check the pressure switch of the air compressor and you will see the reading of PSI.
Remove the nozzle to disconnect
Once the HPA tank is full, turn off the power supply or switch off the air compressor without wasting any time. Simply remove the nozzle in order to disconnect the tank from the air compressor. Now place the tank in a secure place because an open area is risky.
The first thing you need to know about the safety is that HPA tanks have a hydro date that indicates the last time of inspection. It is recommended to reinspect the tank once every five years. Secondly, Never put oil or grease on the nipple of an HPA tank. Because, during the filling process, it creates up heat that can certainly warm those lubricants and lead to a fire.
Avoid storing the tank directly under sunlight or leaving it in a hot car. HPA tanks won’t be over-pressurised but still, excess heat can cause serious damage to their regulator seals. It is better to use a tank cover to keep the tank safe from the environment.