In applications that use compressed air, water separators are not restricted to your want; instead, it is an essential component. Air compressors generate a substantial amount of condensed air throughout their lifetimes through compressing air.
With the help of a water separator along the original filter installed in an air compressor, it can remove all the different impurities that a filter can’t. Such equipment requires proper maintenance, but are you looking for a handy solution?
Using a water separator saves you money and enhances the working of the compressor. I assume that you have enough information about the compressor but the installation is what gives tough times. So, where exactly do you install the water separator on the air compressor? is what we will discuss here.
Contents
Where to Install Water Separator on Air Compressor? – Easy approach
The approach to this question is quite simple. The pressure gauge in an air compressor incorporates a hose pipe. To make it straightway, you must install the water separator between the pressure tank and the hose pipe connector.
The process behind this is that the centrifugal separator that works by rotator motion spins the air, which compels the particles to speed up and move in a radial and outward direction, by which it all takes place.
The other approach is if you want a greater outcome by following a simple technique. You need to ensure that there must be a hole that is 30 – 50 feet. The hole depth determines that the machine will get enough time or depth for the pressure air to cool down for functioning.
This way, you should also think of another way; the water vapors formed by the separator will condense back to the liquid state. But if the separator is not given enough time, it will get moisture in the air compressor that will harm the compressor as the condensation process will not be done in the meantime.
Instead, it will continue to float in the air, get into the air supply line, and eventually make its way into your equipment.
With all being said, in an air compressor, multiple other factors use separators having the same construction somehow but different functioning. In the next given portion, we will discuss the installation of the separator with different designs.
Where To Install Water Separator on Air Compressor in Linear Plumbing?
When you use an air compressor in linear plumbing, mainly compressors are connected to your main power sources; the approach should be unplugging the air compressor. For extraction purposes, these compressors are attached to the hoses/pipes. For installing a water separator, it is advised to connect the separator to the line for working.
The air that travels through the hose will be able to travel through the regulator; with that passageway, it will go into the hose and then will power the tool that can be any air tool, etc.
Where To Install Water Separator on Air Compressor with Overhead Reel Design?
The process is quite similar to the above we have discussed for the water separator, with an overhead reel design. But to make it straight and enhance the usage, we will go for the distribution on the spine design of an air compressor because this one runs the pipe through the ceiling.
It is generally used to maximize the space for better flow and working. It uses two pipes, the big one for the distribution of compressed air and the smaller one for improving airflow.
Tools necessary for the installation of water separator:
For the installation purposes, there are multiple tools you will need while setting up the separator hand to hand, but there is some must-have equipment that is mentioned below:
- A piece of equipment to protect one’s ears from different noises and stuff.
- A variety of coupler plugs of varying sizes can be used to connect rapidly.
- If you are unable to tighten the connectors correctly, you may additionally require a crescent wrench in addition to thread seal tape or Teflon.
- It will be advantageous for you to have elbows that are 90 degrees so that you can secure the hose in a position that is comfortable for you.
Final words:
Air compressors are more prone to damage as compared to any other machines. They are the main source of moisture and dust accumulation that make them explode or lead them to regular maintenance. To avoid such conditions, such tools are being installed in it.
Despite being an essential component, the compressors don’t come with it, so you always need to get one to make your air compressor work. However, purchasing one is strongly suggested if you want to keep your tools and equipment in good condition and increase the length of their useful lives.
- How To Make A Confetti Cannon With An Air Compressor - December 4, 2022
- How To Keep Air Compressor From Freezing - December 3, 2022
- How To Install Oil Water Separator On Air Compressor - December 2, 2022
