Who doesn’t know about regripping the golf clubs? If you are a player who plays almost every day, you must be pretty aware of the golf club’s wear and tear as it is prone to it. But you can’t go to the golf store every time.
To save up hundreds of dollars and to have hand on expertise, it is necessary to learn the right technique from experts. But for that, people demand money too, so to avoid all this, the internet is your companion, and this post will be your best friend!
Starting from the right way to regrip the golf clubs to using the right tools, we will discuss everything to a great extent. Make sure to read it carefully and don’t miss out on any step. That being said, let’s dive into the topic.
How to regrip golf clubs with an air compressor?
You may experience issues with control and accuracy if your grips are greasy or worn. You should regrip your clubs for a variety of reasons. Grip consistency decreases as they grow worn, fractured, and greasy. Grips come in a range of sizes to better match various hand sizes and physical parameters.
Also, if you don’t care and regularly maintain your golf, there will be more chances of wear and tear. So, every once in a while, you must regrip golf clubs with an air compressor. To do that, you need some tools!
Equipment you will need:
- Rubber vise clamp
- A utility or straight-bladed knife
- A grip lubricant
- Spotless cloth
- Double-sided grip tape in 3/4″ or 2.”
6 Step guide to Regrip golf with an air compressor – Detail Steps
Here is your detailed 6-step guide on how you can easily regrip golf clubs without spending extra money. These include the following:
1. Remove the grip:
The first step you need to do is to get rid of the previous grip. What mistake most people make is they use a cutter knife, but for smoother working, you should go for a hook blade. Moreover, you will be able to save the shaft from getting damaged.
After that, make an incision by placing the hook, but make sure to take all the precautionary measures while doing so.
2. Remove the tape:
After removing the grip, you will see the tape firmly wrapped onto it, and it’s time for you to get rid of this coating. Use the cutter knife to remove the entire shaft’s tape and remove it gradually. Don’t try to fasten the process, as it can damage the shaft, and you will waste your golf. On the other hand, if you are short on time, you can use a blow dryer. By blow drying, the tape will get warm, and it will get a lot easier to remove it.
3. Use a solvent:
This is an additional step if you don’t want to waste your old grip. All you have to do is to add the solvent between the grip and the tape.
4. Use compressed air:
In another way, just like using a solvent and cutting off the tape, you can also use compressed air to remove it without damaging it. Fit the air compressor with a nozzle and direct the air into the grip.
It will expand and separate it from the tape. This way, you can easily get away with the tape.
5. Apply the grip tape:
Now is the time to apply the grip tape, but first, you must do the measurements. For measuring, note and do the marking of how much of the shaft you need to cover. Also, there are different kinds of tapes, varying from electrical tape to double-sided tape.
Start from the edge of the shaft and take it to the bottom of it to cover it completely. Also, ensure you leave some extra tape at the front edge so you can lock it over there as an endpoint. For more portability and grip, you can do it twice.
6. Use compressed air for grip:
This is our main point with its advantages and disadvantages, but I believe this is the quickest yet straightforward way to regrip your golf club.
If you are using an air compressor, you can skip the step where we measured and applied the tape. That’s why I said to focus on each step and don’t skip. Moving on, if you show carelessness in this step, you can damage your grip, which can result in an explosion.
To begin, position the grip’s face just above the shaft’s end. Next, place the air compressor nozzle into the grip’s hole. While driving the grip down the shaft, inject short bursts of air into it. The grip will gradually cover the shaft until it is absorbed, and this way, you will be done.
If you are a beginner and haven’t done this before, you should go for an air compressor system compared to the others. Compressed air makes the process direct, and you can get it done by yourself in a few minutes.
We have talked about the 6-step guide on how to regrip the golf club with an air compressor, and with that, I would like to sign off! Wish you a stroke of good luck.